Best quality Chery A1 - Ultra-thin China car aluminum radiator for chery car – Qingzhi

The hot coolant becomes cold by dissipating heat to the air, and the cold air heats up by absorbing the heat dissipated by the coolant.

Q1. How is yours after the sale?
A: (1)Quality guarantee: replace new one within 12months after B/L date if you buy items we recommended with bad quality.
(2)Due to our mistake for wrong items, we will bear all relative fee.

Q2. Why choose us?
A: (1)We are “One-stop-source” supplier, you can get all the shape parts of our company.
(2)Excellent service, fast responded within one working day.

Q3. Do you test all your goods before delivery?
A: Yes. We have 100% test before delivery.

Automobile radiator is composed of water inlet chamber, water outlet chamber and radiator core. The coolant flows in the radiator core and the air passes outside the radiator. The hot coolant cools by radiating heat into the air, and the cold air warms up by absorbing the heat from the coolant.
1. The radiator shall not come into contact with any acid, alkali or other corrosive properties.
2. It is recommended to use soft water. Hard water should be used after softening treatment to avoid blockage and scale in the radiator.
3. Use antifreeze. In order to avoid the corrosion of the radiator, be sure to use the long-term antirust antifreeze produced by regular manufacturers and in line with national standards.
4. During the installation of the radiator, please do not damage the radiator (sheet) and bruise the radiator to ensure the heat dissipation capacity and sealing.
5. When the radiator is completely drained and then filled with water, turn on the water drain switch of the engine block first, and then close it when water flows out, so as to avoid blisters.
6. Check the water level at any time during daily use, and add water after shutdown and cooling. When adding water, slowly open the water tank cover, and the operator’s body should be as far away from the water inlet as possible to prevent scald caused by high-pressure steam ejected from the water inlet.
7. In winter, in order to prevent the core from cracking due to icing, such as long-term shutdown or indirect shutdown, the water tank cover and drain switch shall be closed to drain all the water.
8. The effective environment of the standby radiator shall be ventilated and dry.
9. Depending on the actual situation, the user should completely clean the core of the radiator once in 1 ~ 3 months. During cleaning, wash with clean water along the side of the reverse inlet wind direction.
10. The water level gauge shall be cleaned every 3 months or, depending on the actual situation, all parts shall be removed and cleaned with warm water and non corrosive detergent.