Cheapest Factory Chery Wheel - KIT for CHERY AMULET A15 – Qingzhi

1 A11-3100113 FIXING COVER-SPARE WHEEL
2 A11-3900109 RUBBER BINDING BELT
3 A11-3900105 DRIVER SET
4 A11-3900103 WRENCH
5 A11-3900211 SPANNER SET
6 A11-3900107 OPEN AND WRENCH
7 A11-3900020 JACK
8 A11-3900010 JACK SUB ASSY
9 A11-3900010BA TOOL ASSY
10 A11-3900030 HANDLE ASSY – ROCKER
11 A11-8208030 WARNNING PLATE – QUARTER

The sporty appearance kit refers to a complete set of components that can improve the aerodynamic performance of the vehicle, reduce the air resistance and improve the visual impact by adding external spoiler and shunting device, so as to achieve a more sporty driving experience. The sports appearance kit includes large enclosure, chassis enclosure, luggage rack, tail wing, etc. The main function of large enclosure (spoiler outside the car body) is to reduce the reverse airflow generated by the car while driving and increase the downforce of the car at the same time. Make the car run more smoothly, so as to reduce fuel consumption. The most personalized accessories in appearance.

classification
The big encirclement is basically divided into two categories: pump handle and lip. The encirclement of pump handle is to remove the original front and rear bars, and then install another pump handle. This kind of enclosure is easy to install, and can change the appearance with large radiance, which is more personalized. The lip type is surrounded by adding half of the lower lip to the original bumper. The quality and installation technology of this type of surround are very high. Because the tightness between the enclosure and the bumper cannot exceed 1.5mm, otherwise it will affect the appearance, and there will be the risk of falling off when driving at high speed. Some of the refitting shops installed some surrounds of different quality, with extremely poor tightness. Then, in order to repair the gap, they tightened them with screws, applied atomic ash, and finally baked oil. This kind of practice is very unprofessional, because the original bumpers of most cars are made of Pu plastic. Such materials have strong flexibility, while those made of resin have high hardness and poor toughness. Therefore, after driving on the car for a period of time, cracks are bound to appear in this position. If you want to remove it, you are simply asking for trouble.