Chinese wholesale Chery Amulet - Original Clutch Brake Master Cylinder Chery Car Auto Parts – Qingzhi

The main function of the brake master cylinder is to convert the mechanical force exerted by the driver on the brake pedal and the force of the vacuum booster into brake oil pressure, and send the brake fluid with a certain pressure through the brake pipeline to each The wheel brake cylinder (sub-cylinder) is converted into wheel braking force by the wheel brake.

The master cylinder pressurizes the oil to the slave cylinder to make the slave cylinder act to brake and release the clutch plate. At the same time, the factors affecting the service life and quality are temperature and the quality of brake oil.
The clutch is located in the flywheel housing between the engine and the transmission. The clutch assembly is fixed on the rear plane of the flywheel with screws. The output shaft of the clutch is the input shaft of the transmission. In the process of driving, the driver can press or release the clutch pedal as needed to temporarily separate and gradually engage the engine and gearbox, so as to cut off or transmit the power input from the engine to the transmission.
Clutch is a common component in mechanical transmission, which can separate or engage the transmission system at any time. The basic requirements are: smooth joint, rapid and complete separation; Convenient adjustment and repair; Small overall size; Low quality; Good wear resistance and sufficient heat dissipation capacity; The operation is convenient and labor-saving. The commonly used are divided into dental inlay type and friction type.
What is the difference between the clutch master cylinder and the brake master cylinder? What are their uses?
1. The clutch master cylinder is connected to the clutch pedal and connected to the clutch booster through the oil pipe.
2. The function is to collect pedal stroke information and separate the clutch through the action of booster. The brake master cylinder, also known as “brake master cylinder” and “brake master cylinder”, is the main matching part of the vehicle braking system.
3. The final function is to cooperate with the brake system assembly to brake the whole vehicle. According to different vehicles, it is also divided into air brake master cylinder and oil brake master cylinder. Generally, most of the brake master cylinders of passenger cars use oil brake master cylinder, while the brake master cylinders of commercial vehicles generally use air brake master cylinder.
4. The clutch master cylinder is the part connected to the clutch pedal and connected to the clutch booster through the oil pipe. It is used to collect pedal travel information and separate the clutch through the action of the booster.
5. The brake master cylinder, also known as “brake master cylinder” and “brake master cylinder”, is the main matching part of the vehicle braking system. The brake master cylinder is the main control device in the vehicle service braking system, which realizes sensitive follow-up control in the braking process and release process of the dual circuit main braking system.