ELECTRIC SYSTEM SWITCH for RIICH S22
1 S22-3718010 SWITCH ASSY-WARNING LAMP
S22-3772057 SWITCH PANEL
S22-3772057BA SWITCH PANEL
3 S22-3772055 SWITCH ASSY-NIGHT LIGHT REGULATOR
4 S22-3772051 ELECTRIC SWITCH ASSY-HEAD LAMP
5 S22-8202570 SWITCH ASSY – RR VIEW MIRROR
6 S22-3718050 INDICATOR SWITCH-ANTI THEFT
7 S22-3746110 CONTROL SWITCH ASSY
8 S21-3746150 CONTROL SWITCH ASSY
9 S22-3746051 SWITCH PANEL-FR DOOR RH
11 S22-3746031 COVER SHEET-WINDOW SWITCH
12 S22-3746030 LEFT FR DOOR WINDOW REGULATOR -and- ITS S
13 S22-3751051 SWITCH ASSY-SLIPPERY DOOR CENTRAL LOCK
14 S22-3751052 SWITCH ASSY-SLIPPERY DOOR CENTRAL LOCK
15 S22-3751050 SWITCH ASSY-SLIPPERY DOOR CENTRAL LOCK
16 S11-3774110 SWITCH ASSY
17 S11-3774310 SWITCH ASSY – WIPER
18 S11-3774010 COMBINATION SWITH ASSY
19 A11-3720011 SWITCH-FOOT BRAKE
20 A21-3720010 SWITCH ASSY – BRAKE
21 S11-3751010 CONTACT SWITCH ASSY – DOOR
22 S11-3704013 IGNITION SWITCH HOUSING
23 S21-3704027 BOLT
24 S11-3704010 IGNITION SWITCH ASSY
25 S11-3704015 IGNITION SWITCH
26 Q2734213 SCREW
27 S21-3774013BA UPPER COVER – CONBINATION SWITCH
28 S21-3774015BA COVER – COMBINATION SWITCH PROTECTOR
29-1 S22-3772050 CONBINATION SWITCH ASSY-HEAD LAMP
29-2 S22-3772050BA CONBINATION SWITCH ASSY-HEAD LAMP
Four states of ignition switch and correct operation method
After locking the vehicle, the key will be in the lock state. At this time, the key door will not only lock the direction, but also cut off the power supply of the whole vehicle.
Acc status is to connect the power supply of some electrical equipment of the vehicle, such as CD, air conditioner, etc.
During normal driving, the key is in the on state, and all circuits of the whole vehicle are in the working state.
The start gear is the starting gear of the engine. After starting, it will automatically return to the normal state, that is, the on gear.
Each of these four gears is progressive, which aims to make the electrical equipment enter the working state one by one, which can also alleviate the burden of automobile battery caused by instantaneous power on. If you don’t stop in other gears and enter the start state directly from lock, the load of the battery will be increased instantly. At the same time, because all electrical equipment have not fully entered the working state, it is difficult for the computer to command the engine to start normally, so this operation is very unfavorable to the battery and the engine. Often doing this will shorten the service life of the battery, make it difficult to start the engine and promote the generation of carbon deposition! Correct method: after the key is inserted into the ignition switch, stay in each gear for about 1 or 2 seconds. At this time, you should be able to hear the power on sound of electrical equipment at all levels, and then enter the next gear!
