Quality Inspection for Chery Tie Rod - TRANSMISSION ASSY DIFFERENTIAL for CHERY QQ SWEET S11 1.1L – Qingzhi

1 S11YF-SCZYF OIL SEAL,OUTPUT SHAFT
2-1 GB276-946008-P6 BEARING
2-2 GBT276-94-6008P6 BEARING
3-1 BS10-4-3802012 DRIVE GEAR SPEEDOMETER
3-2 BS10-4-3802012-01 DRIVE GEAR SPEEDOMETER
4 GB6171-86M10?A1-25 NUT
5 BS10-4-2303004 WASHER LOCK
6 BS10-4-2302001-01 DRIVEN BEVEL GEAR, MAIN REDUCER
7 BS10-5-2303047 SHAFT DIFF.PINION
8 GB276-946207-P6 BEARING
9 BS10-4-2303830 SEAL,OIL-OUTPUT SHAFT
10 BS10-4-2303003 SCREW – DOORIVEN TAPER GEAR
11 BS10-4-2303046 WASHER,PLANETARY GEAR
12 BS10-5-2303044 PLANETARY GEAR
13 BS10-4B-3802820-01 SPEEDOMETER DRIVEN GEAR ASSY
14 BS10-5-2303002 FACE GEAR
15 BS10-5-2303043 ADJUST WASHER,FACE GEAR
16 BS10-4-2303950-01 DIFFERENTIAL

Position of automobile differential: different automobile differential is installed in different places, and the differential of front drive trolley is installed on the gearbox; The rear drive is installed in the rear axle differential case. The differential is composed of planetary gear teeth, planetary gear carrier (differential housing), half shaft gear and other parts. The automobile differential has three functions: 1. Transmit the power output by the engine to the wheels; 2. Divide the increased torque of the main reducer into two parts and distribute it to the left and right half shafts; 3. As the main reduction gear of the automobile, reduce the speed of the transmission system before the power is transmitted to the wheels, transfer the power to the wheels, and allow the wheels on both sides to rotate at different wheel speeds.

① If the car can’t drive, whether in R or D, it’s probably due to oil leakage from the automatic transmission. At this time, you need to check the bottom of the car to see if there is red oil leakage. If so, it means that the transmission leaks oil. If the sealing ring is aging, as long as

2. ② abnormal upshift. If you feel that the speed before upshift is significantly higher than before (ECO mode / normal mode), or even upshift is not allowed, it is likely that the throttle cable or throttle position sensor is improper. Secondly, it is also possible that the speed sensor is faulty. First of all, we need to check one

3. ③ engine idling generally speaking, engine idling is divided into two situations, one is the instant of transmission