TRANSMISSION FORK-REVERSE GEAR MECHANISM for RIICH S22

1 519MHA-1702410 FORK DEVICE – REVERSE
2 519MHA-1702420 PITCH SEAT-REVERSE GEAR
3 Q1840816 BOLT
4 519MHA-1702415 DRIVING PIN-IDLE GEAR

Reverse gear, fully known as reverse gear, is one of the three standard gears in the car. The position mark on the gear console is r, which is designed to enable the vehicle to reverse. It belongs to a special driving gear.

Reverse gear is a driving gear that all cars have. It is generally equipped with the mark of capital letter R. after the reverse gear is engaged, the driving direction of the vehicle will be opposite to the forward gear, so as to realize the reverse of the car. When the driver moves the gear shift lever to the reverse gear position, the direction of the power input runner at the engine end remains unchanged, and the reverse output gear inside the gearbox is connected with the output shaft, so as to drive the output shaft to run in the reverse direction, and finally drive the wheel to rotate in the reverse direction for reverse. In the manual transmission vehicle with five forward gears, the reverse gear position is generally behind the fifth gear, which is equivalent to the position of “sixth gear”; Some are set in the independent gear area, which is more common in models with more than six forward gears; Others will be set directly below gear 1. Press the gear lever down one layer and move it to the lower part of the original gear 1 to connect, such as old Jetta, etc. [1]

In automatic cars, the reverse gear is mostly set in the front of the gear console, immediately after P gear and before n gear; In an automatic car with or without p gear, neutral gear must be separated between reverse gear and forward gear, and R gear can be engaged or removed only by stepping on the brake pedal and pressing the safety button on the gear handle or pressing the gear shift lever. These designs of automobile manufacturers are to avoid misoperation by drivers to the greatest extent